Customization: | Available |
---|---|
After-sales Service: | on-Line Technical Support |
Warranty: | More Than 5 Years |
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Float glass is produced by heating silica sand, soda ash, dolomite, limestone and salt cake etc. Other materials may be used as colorants, refining agents or to adjust the physical and chemical properties of the glass, and then fed together with suitable cullet in a controlled ratio, into a furnace where it is heated to approximately 1500°C. Common flat glass furnaces are 9m wide, 45m long, and contain more than 1200 tons of glass. Once molten, the temperature of the glass is stabilized to approximately 1200°C to ensure a homogeneous specific gravity, where molten glass is poured from the furnace and floated evenly onto a bed of molten tin. The glass is gently cooled under controlled conditions to anneal the glass which enables the glass to be cut and modified. Float glass include clear float glass and ultra clear float glass.
Product | Float glass |
Thickness
|
3-19mm
|
Max Size
|
1830*2440,2000*2440,2140*3300,2440*3660,2440*6000mm
|
Glass Colors
|
Clear, Ultra clear, French green, Dark green, Euro grey, Dark grey, Ford blue, Dark blue,Euro bronze, Dark bronze, Pink, etc.
|
Glass Type
|
Tempered glass, Heat strengthened glass, Tempered glass with heat soak, Bent tempered glass
|
Package
|
Worthy export wooden crate, with paper between each glass, suitable for export
|
Applications
|
windows and doors in architecture Decorations Skylights Escalators Table tops and furniture Green house Facades and curtain walls
Refrigerator shelves Railings |
Certificate
|
GB15763.2 EN12150.1 EN12600 ANSIZ97.1 AS/NZS2008
|
Q1: How to judge the quality of float glass?
A1: Flatness, transparency, colorless, impurities, bubbles, etc.
Q2: How to reduce the self-implosion?
A2: The high quality float method is used for hot dip treatment, edge treatment and proper stress intensity. Pay attention to avoid side collision of glass during installation.
Q3: Scope of use of toughened glass?
A3: Safety is not involved in some parts of the building, but it is necessary to install toughened glass to improve the compressive strength and explosion-proof capacity,not to endanger the person safety
Q4: When toughened glass is broken, is the grain smaller the better?
A4: No, the smaller the particle, the easier it is to explode.
Q5: Can toughened glass and semi-toughened glass be made into laminated glass?
A5: Can't. The national standard stipulates: the glass that stresses the difference cannot make laminated glass, because in use process, the pressure that two pieces of glass bears is different.
Q6: Whether the laminated glass can fire, can the sound insulation?
A6: No, the smaller the particle, the easier it is to explode.
Q7: How many uv low-e glass can reduce?
A7: It is not fireproof glass, but has certain fireproof ability, also can soundproof, laminated glass is inside whole sound wave frequency range, in control noise is very good.
Q8: Does the air in the insulating glass do not oxidize the membrane?
A8: No, because there is a molecular sieve in the insulating glass, and the molecular sieve always keeps the air dry, so the membrane is not oxidized.
Q9: How much ultraviolet radiation can low-e glass reduce?
A9: It can reduce uv by 14% compared to heat reflecting glass. That's a 25 percent reduction in uv radiation compared to white glass.